Product ID:HERCULES DARK CUTTING OIL
MSDS Date:06/25/1990
FSC:9150
NIIN:00-252-6371
Status Code:A
MSDS Number: CLHJH

HERCULES CHEMICAL CO INC

111 SOUTH STREET(OLD IS 29 W 38 ST)
PASSAIC, NJ 07055-7398
US

Emergency Phone: 973-778-5000

Info Phone: 973-778-5000

Cage: 84794

HERCULES CHEMICAL CO INC

PASSAIC, NJ 07055-7398 US

Telephone: 973-778-5000

Cage: 84794

PETROLEUM-BASED LUBRICATING OILS

CAS: 64742-52-5

RTECS: PY8035000

OSHA PEL 5 MG/M3 (OIL MIST

ACGIH TLV: 5 MG/M3 (OIL MIST)

PETROLEUM-BASED LUBRICATING OILS

CAS: 64742-53-6

RTECS: PY8036000

OSHA PEL 5 MG/M3 (OIL MIST)

ACGIH TLV: 5 MG/M3 (OIL MIST)

LD50 LC50 Mixture:NO DATA PROVIDED BY MANUFACTURER
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PRODUCT HAS A LOW ORDER OF ORAL AND
DERMAL TOXICITY. POSSIBLE ASPIRATION HAZARD. INDUCED VOMITING MAY
CAUSE ASPIRATION OF PRODUCT INTO LUNGS.
Explanation of Carcinogenicity:NO DATA PROVIDED BY MANUFACTURER
Effects of Overexposure:SKIN: MODERATE IRRITANT AND SKIN DEFATTER. EYE:
MILD (TRANSIENT) IRRITANT. PROLONGED OR REPEATED SKIN CONTACT WITH
PRODUCT TENDS TO REMOVE SKIN OILS POSSIBLY LEADING TO IRRITATION
AND DERMATITIS, HOWE VER BASED ON HUMAN EXPERIENCE AND AVAILABLE
TOXICOLOGICAL DATA, THIS PRODUCT IS JUDGED TO BE NEITHER A
"CORROSIVE" OR AN "IRRITANT" BY OSHA CRITERIA. VARIABILITY AMONG
INDIVIDUALS: HEALTH STUDIES HAVE SHOWN THAT MANY PETROLLEUM
HYDROCARBONS AND SYNTHETIC LUBRICANTS POSE POTENTIAL HUMAN HEALTH
RISKS WHICH VARY FROM PERSON TO PERSON. AS A PRECAUTION, EXPOSURE
TO LIQUIDS, VAPORS, MIST OR FUMES SHOULD BE MINIMIZED.
Medical Cond Aggravated by Exposure:NONE KNOWN

First Aid:INHALATION: VAPOR INHALATION UNDER AMBIENT CONDITIONS IS
NORMALLY NOT A PROBLEM. IF OVERCOME BY VAPOR FROM HOT PRODUCT,
IMMEDIATELY REMOVE TO FRESH AIR IF NOT BREATHING. GET MEDICAL
ATTENTION. INGESTI ON: DO NOT INDUCE VOMITING. GET MEDICAL
ATTENTION. SKIN: WASH SKIN THOROUGHLY WITH SOAP AND WATER AND
REMOVE CONTAMINATED CLOTHING. EYE: FLUSH WITH PLENTY OF WATER FOR
15 MINUTES OR UNTIL IRRITATION S UBSIDES. IF IRRITATION PERSISTS,
GET MEDICAL ATTENTION.

Flash Point Method:COC
Flash Point:=160.C, 320.F
Lower Limits:1%
Upper Limits:6%
Extinguishing Media:DRY CHEMICAL, CO2, FOAM. USE WATER TO KEEP
FIRE-EXPOSED CONTAINERS COOL.
Fire Fighting Procedures:RECOMMEND SCBA (SELF CONTAINED BREATHING
APPARATUS) SUPPLIED AIR BREATHING GEAR WHEN FIRE FIGHTING IS
CONFINED SPACES. MINIMIZE BREATHING GASES, VAPOR, FUMES, OR
DECOMPOSITION PRODUCTS. WATER FROTH MA Y BE USED TO FLUSH SPILLS
AWAY FROM EXPOSURE.
Unusual Fire/Explosion Hazard:NONE

Spill Release Procedures:HANDLE AS AN OIL SPILL. USE OIL ABSORBING
MATERIAL. SWEEP & SCOOP UP & REMOVE. PREVENT SPREAD OF SPILL. KEEP
PRODUCT FROM SEWERS & WATER COURSES BY DIKING, ETC. ADVISE
AUTHORITIES IF PRODUCT HAS ENTER ED OR MAY ENTER SEWER, WATER
COURSES, OR EXTENSIVE LAND AREAS. ASSURE CONFORMITY WITH LOCAL
REGULATIONS.
Neutralizing Agent:NO DATA PROVIDED BY MANUFACTURER

Handling and Storage Precautions:NO SPECIAL PRECAUTIONS NEEDED
NORMALLY. HOWEVER, AVOID BREATHING OIL MIST AND EXCESSIVE SKIN
CONTACT.
Other Precautions:NONE

Respiratory Protection:IF POSSIBILITY OF OIL MISTS EXISTS, USE NIOSH
APPROVED MASK FOR OIL MISTS.
Ventilation:LOCAL EXHAUST: AS NEEDED TO MAINTAIN COMPLIANCE WITH TLV
Protective Gloves:RUBBER GLOVES - OIL RESISTANT
Eye Protection:GOGGLES IF OIL IS BEING SPRAYED OR SPLASHED
Other Protective Equipment:GLOVES IF PROLONGED SKIN CONTACT CANNOT BE
AVOIDED
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING. MINIMIZE
BREATHING OF VAPOR MIST, FUMES. REMOVE CONTAMINATED CLOTHING,
LAUNDER OR DRY CLEAN.
Supplemental Safety and Health
NO DATA PROVIDED BY MANUFACTURER

HCC:V5
Boiling Pt:B.P. Text:465 TO 900 DEG F
Vapor Pres:<0.1 MMHG @ 38 DEG C
Vapor Density:>8(AIR=1)
Spec Gravity:.906 @ 25 DEG C (H2O=1)
Solubility in Water:INSOLUBLE
Appearance and Odor:DARK BROWNISH AMBER LIQUID, PETROLEUM ODOR

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS SUCH AS LIQUID CHLORINE, SODIUM OR CALCIUM
HYPOCHLORITE, AND PURE OXYGEN
Stability Condition to Avoid:OPEN FLAMES, SPARKS, IGNITION SOURCES
Hazardous Decomposition Products:CARBON MONOXIDE, OXIDES OF SULFUR AND
OTHER DECOMPOSITION PRODUCTS MAY FORM UPON INCOMPLETE COMBUSTION
Conditions to Avoid Polymerization:WILL NOT OCCUR

Waste Disposal Methods:ASSURE CONFORMITY WITH APPLICABLE DISPOSAL
REGULATIONS. DISPOSE OF ABSORBED MATERIAL AT AN APPROVED WASTE
DISPOSAL SITE OR FACILITY.

Toxicological Information:NO DATA PROVIDED BY MANUFACTURER

======================================================================
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.

Ecological:NO DATA PROVIDED BY MANUFACTURER

Transport Information:NO DATA PROVIDED BY MANUFACTURER

SARA Title III Information:NO DATA PROVIDED BY MANUFACTURER
Federal Regulatory Information:NO DATA PROVIDED BY MANUFACTURER
State Regulatory Information:NO DATA PROVIDED BY MANUFACTURER